Do you own room that might use a ceiling fan Installing a ceiling fan is as easy as replacing your current light fixture. All of the wiring you need is already available so the only thing is to replace the existing workbox with one that is developed for the weight of a ceiling fan. If you dont adjust the established workbox to something that can handle the weight could mean disaster. Just before you do anything, read the instructions for your fan very thoroughly and make sure that you have the necessary tools.

Should you decide to install the fan over a cathedral type ceiling, you might need to have parts to prolong the fan lower. Any time you are completely ready to put in the fan, ensure that the circuit breaker is turned off so you wont get electrocuted. The moment you eliminate the light fixture, verify to see if the current workbox can handle the added weight. Most workboxes are not made for ceiling fans, you will need added support. This could be done rather effortlessly if you have access to the attic, and are able to get to the area of the new fan.

To help extra support, you nail a 2x4 inside the ceiling rafters where it hits the top of the workbox. The moment the 2x4 is properly anchored, attach the workbox to the 2x4. If you did it correctly, the body weight of the fan must be effectively supported by the 2x4 wood and screws. If you don't have gain access to to the attic, you may have to install metal cross bracing using the hole in your ceiling. It is more hard to do and may not be that secure but its the ideal option if you have no attic admittance.

At this point, after setting up the fan as stated by the instructions, you are set to hang your new fan. The challenging part is hooking up the wiring while retaining the fan. It will rely on the type of fan you have, quite a few come with a bracket with a J hook while others have a holding frame. Most fans, you will find a wall mount switch along with a chain to manage the speed of the fan. woodworking plans If you also establish a light kit with the fan, each can be controlled by a wall switch or chain.

Next, just follow the wiring directions, usually as simple as connecting the two black wires, the two white wires, and also the two ground wires. Once you have accomplished putting together the fan and wires, the last step is to attach the fan blades. Once this is all done, it is time to change the breaker back on to see if it functions.